Despite colored in red, TBV will read most values in that field from the DICOM header of the first (or second) file. The DataType box must contain the "SIEMENS_DICOM_MOSAIC" selection (see screenshot above). In order to prepare the TBV Settings file to handle the exported Siemens data, you must change the settings in the Data Format tab of the TBV Settings dialog.
the settings have to be repeated each time you want to use the real-time export for a new subject. Note that the config file is overwritten each time a new patient is registered, i.e. In XBuilder, change the three export parameters "OnlineTargetPort" (to "-1"), "OnlineTargetHostName" (to name or IP of PC in network receiving data) and "OnlineTargetPath" (to the name of the folder of the PC in the network, e.g. As an alternative solution, the respective "config" file "C:\MedCom\config\Ice\IceConfig.evp" may be changed manually, or better, by using the "XBuilder" program that can be started using the Windows "Run" tool. Unfortunately there seems to be a problem since the IDEA command tool does not save the specified settings properly to disk. The recommended way by Siemens to turn this functionality on is to use the IDEA command tool after switching toadvanced user mode on the console computer (see documentation by Siemens). Since software release VB15A, Siemens supports the real-time export of Dicom mosaic images (one file per functional volume). You may contact me at for any other information or help regarding this issue.Turbo-BrainVoyager v4.0 Settings for Siemens Data So my recomendation is Go for a Windows based DNC system. If your shop-floor has several CNC machines - most windows DNC systems now support more than one CNC per PC.
Nowadays DNC systems come equiped with this functionality as well. This is time consuming and error prone.Ī solution that solves this would recreate a Part Program automatically from where it was aborted (due to power failure of tool-break). Once power fails - the CNC operator is faced with two choices -ġ) Run the part program from begining (waste of time).Ģ) Edit the NC part program to suit the block where the power failed. If you are based in India and are using the CNC for milling dies using large CAD/CAM generated part programs, another difficulty that you must be facing is that of power outages. I recomend a windows based DNC system for you that can support the Sinumerik 840C controller. Windows provides a more user friendly interaction than DOS. What you need is a more robust and user friendly DNC system. I agree that PCIN has limited features and is not user friendly. The PCIN system is a DOS utility that the CNC controller provided for free to use for data transfer between the CNC and your PC.
0 kommentar(er)
